NEW SINGLE BOARD SMD VERSION.
14hp, now 30mm deep with power connected
Timed Stages (Attack, Decay and Release) have a range of 1ms to 10 seconds
30mm LED Sliders for A/D/S/R controls. LED brightness follows the Envelope shape for visual feedback.
Gate Input 5V Pulse
Trigger Input Used to retrigger the envelope from the beginning while gate is high (5V). Can also be used for simpler envelopes (i.e. AD, AR, ASR)
Mode Switch Selects between 3 operation modes
ADSR Normal synth envelope.
Gated Cycle will loop the Envelope only while the gate is high
Cycle mode loops endlessly, In this mode the TIME CV will act as frequency modulation for the resulting LFO.
Cycle has a frequency range of 0.03Hz to ~300Hz
Time CV shortens envelope length (All timed stages A,D and R)
ENV Out Voltage output for Envelope 0-5V
VCA
Can be used independently of the Envelopes.
CV IN is normalled to the corresponding ENV Out. 5V for maximum volume 0V for minimum.
Set up initially for processing an audio signal, the VCAs can also be used to CV control the Envelope’s Level by patching the ENV out into the VCA input and using an external control for CV IN (e.g. Velocity, LFO, Sequencer etc.)
MS317 - Quad Waveshaper
$220 AUD
MS590 V2 - Eurorack Synth Voice
$660 AUD
MS137 - VCF Eurorack Synth Module
Sold Out
Blue –
Blue Cassette (Bonus Tracks)
Rohan The Intern
Sold Out
MS305 - Control/Mixer
$150 AUD
MS237 - Dual 12db VCF Eurorack Module V2
$180 AUD
MS503 - Triple AR
$130 AUD
MS137B - 12dB VCF
$100 AUD
MS1010 V2 - 10 Step CV/Gate Sequencer
$150 AUD
MS313 V2 - Sequential Switch
$150 AUD
MS1010 - 10 Step Sequencer/LFO Eurorack Module
$130 AUD
MS182 - Polivoks VCF
Sold Out
Streaming and Download help